Input
Input
U-value
LCA
Moisture
Heat
Diagrams
Hints
Show:Click on the drawing below to show the 1D cross-section on the right for the selected location. |
Select material
All building component types
WallRoofdormerFlat roofUpper floor ceilingFloorBasement ceilingHistorical timber
| Color code | Iso lines |
Direct contact to outside airRear ventilated claddingRear ventilated roofingNon-heated roomUnheated roof spaceHeated roomGround
insert internal layer:
insert external layer:
Place studs or rafters in this layer
Duplicate layer
Delete layer
rotate layer by 90 degrees
Upside down
Chose thickness automatically
sloped insulation...
heating level...
View...
show the specs of the building material
Edit layer properties...
Reduced air circulation
Furniture, decoration, corners, niches etc. hinder the air exchange on the inside of the building component. Most unfavourable case for panel heating and for moisture protection (corresponds to DIN 4108-3).Free air circulation
Air can flow unhindered along the inside of the building component. Best case for heat dissipation of panel heating and for moisture protection.
Furniture, decoration, corners, niches etc. hinder the air exchange on the inside of the building component. Most unfavourable case for panel heating and for moisture protection (corresponds to DIN 4108-3).Free air circulation
Air can flow unhindered along the inside of the building component. Best case for heat dissipation of panel heating and for moisture protection.