Fenster: | 1.00 m² |
Rahmen: | 0.419 m² |
Verglasung: | 0.581 m² |
Länge Randverbund: | 3.05 m |
Rahmenanteil: | 41.9 % |
Valeur U: | Uw = 1.46 W/(m²K) |
— ou —
Vous acceptez par conséquent les termes et conditions et la Politique de confidentialité.
This R-value calculator analyzes your component (for example, wall, roof, ceiling, etc.) with regard to insulation, moisture protection and heat protection:
The main results are displayed at the bottom of the screen. More detailed information can be found on the left-hand side of the screen using the buttons R-value, humidity, heat, etc.
For commercial usage, calculations are made according to DIN EN ISO 6946 (U value), DIN 4108-3 (moisture protection) and DIN 68800-2 (drying reserve).
Moist and moldy walls are the nightmare of many builders. Therefore, the R-value calculator examines your insulation for potential moisture problems. The article Wasserdampfdiffusion und feuchte Wände (in German) explains how moisture and mold can occur. At this point, the following simplification is sufficient:
In winter the warm room air contains more moisture than the cold outside air. This is why water vapor diffuses through the component from the inside to the outside. Because the outer, colder layers can only contain very little water vapor, it must be ensured that the water vapor escapes as easily as possible from the outside. If the water vapor accumulates on a cold layer, condensation is likely to occur.
Moisture protection in wood structures is particularly important. For this reason, in addition to moisture protection according to DIN 4108-3 (in German), a drying reserve in accordance with DIN 68800-2 (in German) is required, which should also allow harmless drying of some unintentionally penetrated moisture.
Nous utilisons des cookies pour personnaliser les contenus et traiter vos calculs de valeur U. Politique de confidentialité
Accepter Quitter la page