Exterior wall, U=0,29 W/m²K
| Thermal protection | Moisture proofing | Heat protection |
|
U-value: 0,29 W/m²K Surface temperature.: inside (min/medium): 17.6 / 17.6 °C outside (min/medium): -14.6 / -14.6 °C |
sd-value: 2,67 m No condensate Drying reserve: 1176 g/m² |
Temp.Amplitudendämpfung: 526,3 phase shift: 18,5 h heat storage capacity: 684 kJ/m²K heat storage capacity: 581 kJ/m²K |
Impact of each layer and comparison to reference values
For the following figure, the thermal resistances of the individual layers were converted in millimeters insulation. The scale refers to an insulation of thermal conductivity 0,045 W/mK corresponding to 'Mineraldämmplatte' in this component. The millimeter scale also shows, how much additional insulation would be necessary to achieve various standards.
Moisture proofing
This component is free of condensate under the given climate conditions.
Mould protection
The temperature of the inside surface is 17,6 °C leading to a relative humidity on the surface of 58 %.
Mould formation is not expected under these conditions.
Note: This is only an extract of the component analysis. Important information on possible defects may be missing. You will get the complete analysis when you open the component in the editor.
Nutzen Sie bereits den für Sie idealen Zugang zu u-wert.net?
| ohne Konto (kostenlos) | mit Konto (kostenlos) |
Plus-Option* Infos & Kosten |
PDF-Option* Infos & Kosten |
|
| U-Wert |  | | | |
| Feuchteschutz | | | | |
| Hitzeschutz | | | | |
| Wärmeverluste | | | | |
| Amortisierung | | | | |
| Gewerbliche Nutzung | | | ||
| Werbefreies Rechnerlayout | | | ||
| Anpassbares PDF-Dokument | | |||
| Baustofffarbe frei wählbar | | |||
| Baustoffe aus DIN 4108-4 & DIN 10456 | | |||
| U-Wert nach DIN 6946 | | |||
| Speicherplätze für Berechnungen | 15 | 100 | 250 | |
| Eigene Baustoffe | 10 | 100 | 100 | |
| Anmelden | Jetzt testen | Jetzt testen |
*U-Wert, Feuchteschutz, Hitzeschutz, Amortisierung und Wärmeverluste sind Teil des kostenlosen Basis-Kontos.
Commercial use only with Plus-Option, PDF-Option or Profi-Option.